Lift-Off Hinge 5020 Unfinished Iron
Item no: 5020-H-KB_VS1
Shelf: L27:G/D:12
98 mm load-bearing lift-off hinge.
Lift-off hinge with a tapered post and a 98 mm leaf, a traditional size for interior doors.
This hinge is made at Eskilstuna Kulturbeslag's factory and follows an older standard size.
This type of hinge was widely used from approximately 1870 to 1935. The hinge is made entirely from untreated iron.
Incl. VAT
Handing
Product information
Dimensions when extended.
| Height (H) | 98 mm |
| Width (L) | 85 mm |
| Leaf width | 36 mm / 22 mm |
| Material thickness | 2,5 mm |
Post diameter 14 mm.
Pin diameter approx. 8 mm.
Available in both right- and left-handed versions.
NOTE! These hinges are not sold in pairs! Price per hinge (1 male part + 1 female part).
PLEASE NOTE: These hinges are designed to be recessed and fitted between the door and frame. Right- or left-handed orientation is determined while standing in front of the closed door with the hinges visible.
If these hinges are surface-mounted to the frame and door, the handing is reversed: a right-hung door uses the opposite configuration to a left-hung door.